Product code E00319 | Currently out of stock |
▪ Temperature range - -40...+85 С.
▪ Permissible fall height - 2.5 m.
▪ Service life - 5 years .
PRECAUTIONS
▪ When installing, the arrow on the side must point up.
▪ When extinguishing liquid fires (class B), it is recommended to hang the ball over the fire, as in some cases the device may fall below the fire level (ie, may sink).
▪ Do not use the balloon as a toy.
▪ Keep out of the reach of children.
▪ In case of spillage of powder due to damage to the ball, collect the powder with a cloth or vacuum cleaner, or rinse with water.
INSTRUCTIONS FOR USE
Automatic use
▪ Place the ball at a distance of 30 cm from potential ignition points.
▪ When in contact with fire, the ball is activated by itself.
▪ It is recommended to install in places where the risk of fire is especially high. For example, above electrical switches (toggle switches, circuit breakers, etc.), in places where electrical circuits are distributed (switchboards, sockets, etc.) subject to overloads.
Manual use
▪ When extinguishing a fire, simply throw the ball into the fire without getting closer than 2 meters to it.
▪ The ball activates within 3-10 seconds and the powder inside extinguishes the fire.
▪ Use multiple balloons if necessary.
Storage conditions: keep in a dry place, avoid direct sunlight.
TECHNICAL SPECIFICATIONS
Elide fire SHAR-1 is effective for extinguishing almost all major types of fires corresponding to the following fire extinguishing classes:
A - combustion of solid substances such as wood, cloth, coal, rubber, plastics.
B - combustion of liquids such as gasoline, petroleum products, alcohol, glycerin.
E - burning equipment under voltage up to 5000 volts.
Do not be afraid of fragments from this ball. The very low density of the body material eliminates the formation of traumatic fragments during explosion. If you are close to the detonation, then do not go deaf, but 140 dB is unpleasant, it is advisable not to be in small enclosed spaces. With an organized detonation, being nearby, it is better to close your eyes.
For 5 years, you will get rid of many problems.
But the main thing is that technical readiness and serviceability will not let you down.
Peculiarities | Elide Fire Extinguisher | conventional fire extinguisher |
Self-activation | This is the world's only portable fire extinguisher that self-activates when it comes into contact with fire! The shell of this powder fire extinguisher cannot withstand temperatures above 80 degrees, it begins to collapse, allowing the igniter cord to catch fire and undermine the pyrotechnic charge, which will spray a special powder in all directions with a powerful ejection. The protected volume is 30 cubic meters. | Requires a specific sequence of actions in order to start its work. It is necessary to break the seal (everyone forgets about this in extreme conditions and the wire of the seal tightly blocks the pin), pull out the pin, turn the socket, etc. Better yet, read the instructions on the fire extinguisher. Meanwhile, a fire is raging around you. |
Fire alarm | This dry powder fire extinguisher can also be used as a fire alarm, since from the moment of activation it produces a loud bang of about 127 dB, which allows you to warn you of a fire. | Conventional fire extinguishers do not have such a mechanism. And people can remain in the dark for a while, while the fire doubles its strength every second. |
Lightness (dimensions) | The ball is only 15 centimeters in diameter and weighs 1.3 kg. Due to its small size and lightness, even children or any other disabled people can use it. | Most of the rest of the fire extinguishers are metal cylinders with a weight as if they were filled with cast iron, not foam. Having a weight of 10-15 kg with the contents of the cylinders themselves. |
Saving | Warranty period of service of powder fire extinguisher Elide Fire is 5 years . The Elide Fire extinguisher is designed in such a way that it does not require recharging and maintenance. Thanks to this, you will not have the cost of maintaining this fire extinguisher. | Periodic maintenance is required, such as shaking, checking, recharging, various tests. |
Safety | Due to self-activation, direct presence near the source of ignition is not required. Enough to fix in potentially dangerous areas. | Forced approach to the flame at a distance necessary for the fire extinguisher to bring the extinguishing agent to the fire. In the case of a serious fire, the fire cannot be approached even 10 meters. |