| Product code E00076 | Currently out of stock |  |
Melesta - "Life-giving" and "dear" water generator.
Currently out of stock
The amazing healing properties of "living" and "dead" water have long attracted the attention of scientists. Long-term studies have shown that "living" and "dead" water is water charged by electrolysis. In its composition, it is close to the natural body fluids - blood, lymph and intercellular fluid. Thanks to this, the body does not need to modify it and spend energy on it. Both "living" and "dead" water are immediately included in the active metabolism, accelerate and normalize it, and thereby eliminate the causes of many diseases.
The difference between them is that “living” water is an alkaline solution, with an acidity level (pH) of 9 to 12. Electrochemists call this liquid a catholyte. It effectively stimulates the main biological processes, restores the body's immune system, improves overall well-being and promotes rapid renewal of damaged cells.
With the help of "living" water, the absorption of nutrients, vitamins and microelements increases, wounds, stomach and duodenal ulcers, bedsores, trophic ulcers and burns heal quickly. Due to its special softness, "live" water softens the skin well and makes the hair silky.
In living water, wilted flowers quickly come to life and remain for a long time, and the seeds, after soaking in this water, germinate faster, more amicably, grow better when watered and give a greater yield.
"Dead" water (anolyte) has a pH of 2 to 5 and has completely different properties. It has a pronounced antiseptic effect, inhibits the development of pathogenic bacteria and viruses, disinfects the surface of the skin and mucous membranes. At the same time, "dead" water is able to remove excess salts, toxins and toxins, reduce joint pain and lower blood pressure.
It can be used to rinse the nose, mouth, throat with colds, it helps to quickly get rid of a runny nose and prevent the disease during seasonal epidemics, after visiting infectious diseases hospitals and crowded places. It is useful to rinse your mouth with "dead" water after eating - it relieves bleeding gums, gradually dissolves deposits on the teeth and prevents the appearance of tartar.
Concentrated "dead" water can be used to process vegetables and fruits in order to increase their shelf life. It perfectly disinfects bandages, linen, various containers, furniture, as well as rooms and soil.
Both types of water can be prepared at home using the Melest activator. In just 3-10 minutes, it allows you to get 3 glasses of "live" and 1 glass of "dead" water. In the autumn-winter period, such water is especially useful - for the prevention and treatment of colds, flu and sore throats, general strengthening of the body and immunity support.
To ensure the protection of the body during the period of mass diseases, it is enough to rinse the nose and throat 3-4 times a day with “dead water”, and after 20-30 minutes drink a glass of “living” water. Also, activated water is effective for seasonal exacerbations of chronic diseases (asthma, gastritis, stomach ulcers).
Melesta is supplied with detailed instructions with a large number of recipes for its use - both for health purposes and for home use. The device is compact and easy to use.
Specifications:
• The anode is made of insoluble rare earth metal - ruthenium oxide;
• Power supply: voltage 220V, frequency 50Hz;
• Power consumption: no more than 110 W;
• Volume of activated water, anolyte: 0.3 l;
• Volume of activated water, catholyte: 0.5 l;
• Water treatment time: 10 min;
• Overall dimensions: 120´120´180 mm;
• Weight: 500 g.
The inner container has a diaphragm - a porous window to ensure the passage of current between the electrodes. Therefore, a slight flow of water from the glass is normal and does not lead to mixing of water and loss of pH solutions. The water to be activated, after removing the top cover with electrodes, is poured into the inner glass inserted into the main tank, as well as directly into the main tank by 5 mm below the ring mark on the inside of the main container. After installing the top cover with electrodes in place and connecting the device to the network, the process of electrolysis (activation) begins. In this case, the catholyte is formed in the main tank, and the anolyte in the glass (inner tank).
• Impact on the body of "dead" water:
• Disinfects the surface of the skin and mucous membranes.
• Suppresses the development of pathogenic bacteria, viruses, pathogens of fungal diseases.
• Dissolves salt deposits.
• Reduces pain in the joints and spine.
• Eliminates bad breath.
• Prevents the appearance of tartar.
• Reduces gum bleeding.
• Impact on the body of "living" water:
• Accelerates the recovery of damaged tissues.
• Stimulates own defenses.
• Helps to cope with chronic inflammatory processes.
• Reduces the frequency of colds and infectious diseases.
• Reduces manifestations of an allergy.
• Helps to cope with gastric and duodenal ulcers.
• Improves digestion.
• Normalizes metabolism.
• Accelerates the healing of burns, cuts, abrasions and other skin injuries.
• Softens the skin and prevents its early aging.
• Reduces skin irritation.
• Indications for the use of "living" and "dead" water:
• Allergy, bronchial asthma.
• Angina, acute respiratory infections, SARS, influenza, bronchitis and their prevention during epidemics.
•Herpes.
• Pain in the back, joints of the arms and legs with arthritis, polyarthritis, osteochondrosis, sciatica, rheumatism.
• Deposition of salts, gout.
• Inflammatory diseases of the liver and biliary tract, hepatitis, cholecystitis, cholangitis.
• Diseases of the gastrointestinal tract (colitis, gastritis, dysentery, gastric and duodenal ulcers, etc.).
• Digestive disorders (heartburn, diarrhea, etc.).
•Hemorrhoids, anal fissures.
• Worms (helminthiasis).
• Cuts, abrasions, scratches,
• Purulent wounds, chronic fistulas, postoperative wounds, bedsores, trophic ulcers, abscesses, burns.
• Violations of water-salt metabolism, edema.
• High blood pressure (hypertension).
• Low blood pressure (hypotension).
•Headache.
• Myositis (muscle inflammation).
• Unpleasant foot odor, fungal diseases, removal of dead skin from the feet.
•Toothache, periodontal disease.
•Colpitis, erosion of the cervix.
• Conjunctivitis, barley.
• Insomnia, increased irritability.
• Psoriasis, lichen, eczema, diathesis.
• Skin irritation after shaving.
• Acne, increased peeling of the skin.
• Prevention of hair loss.
•Phlebeurysm.
•Diabetes.
•Prostate adenoma.
•Use of "living" and "dead" water for economic purposes
•Insect and pest control (moth, aphids).
• Disinfection of linen.
• Sterilization of canning jars.
• Sanitary processing of premises.
• Stimulation of plant growth.
• Refreshing wilted plants.
•Preparation of mortars.
• Washing of linen in the activated water.
• Stimulating the growth of poultry, increasing the productivity of animals.
• Increasing the shelf life of perishable foodstuffs.
• Reducing scale in car radiators.
• Removing scale from kitchen utensils.
• Increasing the germination of seeds and their disinfection.
Method of application
The instructions attached to the device contain detailed instructions on the use of water for various diseases and for household purposes. Most often, a combination of "live" and "dead" water is used with intake or surface use at different times.
Remove the top cover with electrodes from the device. Pour water into the fabric glass to the brim and into the main container 15-20 mm below the top edge of the glass.
It is recommended to use bottled non-carbonated water with a salinity of not more than 250 mg/l as source water.
Install the top cover according to the instructions and connect the device to the mains. Remember the turn on time. The operation of the device is signaled by the glow of the voltage indicator on the electrodes and the release of bubbles on the cathode.
A quantitative characteristic of the acidity or integrity of water is the pH value, which is determined by the activity of hydrogen ions. Distilled water - neutral - has a pH = 7. For anolyte, a pH value of 2 to 6 units is recommended, and for catholyte from 9 to 12 units.
To obtain a catholyte with pH = 10-12 units, 3-10 minutes of operation of the device is sufficient. To obtain an anolyte with pH = 2-4 units, 3-10 minutes of operation of the device is sufficient. The exact time to obtain the desired pH is given in a separate instruction table. The only way to accurately measure the pH level is with a laboratory ionometer.
After the required time has elapsed, disconnect the plug from the socket, carefully remove the top cover with electrodes, remove the fabric cup and drain the anolyte (“dead water”) from it into the prepared container. After that, pour catholyte (“living water”) into another container.
Carefully wipe the electrodes from deposits of hardness salts with a damp cloth.
Anolyte and catholyte should be used within 5-8 hours after preparation - the solutions lose their activity over time. Do not put activated water in the refrigerator - this will lose the quality of the water. When heating such water, do not bring it to a boil.
After 40-60 minutes of storage of the catholyte, a white precipitate of hardness salts appears at the bottom of the container, which must be drained.
A single average dose of activated water for oral administration is 1/2 cup for an adult. For children aged 2 to 5 years, this dose is a quarter of a glass, from 5 to 12 years - a third, and for older children, the dosage can be used as for adults.
It is recommended to take activated water inside 30 minutes before meals or 2-2.5 hours after. It is advisable to avoid fatty and spicy foods and alcoholic beverages during the course of admission.
When ingesting "live" and then "dead" water, you need to pause between doses for at least 1.5-2 hours - otherwise the action of each will be neutralized.
When applied externally (treatment of a wound, burn, etc.), a pause of 8-10 minutes is necessary between the use of "live" and "dead" water.
Terms of use and storage
Before using the unit for the first time, wash the fabric cup in soapy water and rinse it thoroughly in clean warm water. Then treat the water in the installation for 10 minutes and drain it into the sewer.
Follow the safety rules for working with electrical appliances. It is forbidden to connect Melesta to the electrical network without water in the containers.
It is possible to remove the top cover, pour water, drain ready-made solutions, remove and install a fabric cup only on Melesta that is disconnected from the network. It is forbidden to touch the device during operation and rearrange it from place to place.
Do not leave the appliance unattended and do not treat water for more than 10 minutes.
Do not use water with a salinity of more than 250 mg/l. It is not recommended to use tap water, because. the level of its mineralization can be very different.
To prevent the appearance of plaque on the electrodes, after 300-400 minutes of operation, wash them with a 14% solution of table vinegar or a 5% solution of hydrochloric acid.
